*> > >

INSTALLATION DATA
Installation	Indoor or Outdoor
Environment	Industrial, Marine
Amb. Temperature Min/Max	-25°C (CS) and -40°C (LTCS) , storage only / 60°C *
OPERATING CONDITIONS
Fluids	Mineral and synthetic lubricating oil; Hydraulic oil; Diathermic oil; DFD-U and HFDR phosphate organic esters; Glycols; Heavy and Light Fuels; Asphalt and Bitumen; Food Industry; Cosmetics and detergents
Solid content	2 mm (3%) MAX *
Viscosity range	between 1 and 15000 cSt *
Speed	between 750 and 3600 rpm *
Rotation (shaft view)	Clockwise Counter clockwise on request
TECHNICAL CHARACTERISTICS
Design available	STANDARD SEIM, API676 IIIED , API676 IIED, BV Mode II, RINA
Flow rate	between 10 and 20000 lpm (between 0.6 and 1200 m3/h; between 2.7 and 5283.5 GPM) *
Suction pressure	10 barg (146 psi) MAX *
Delivery pressure	40 barg (581 psi) MAX *
Operating temperature	between 0 and 300 °C *
Seal	Single or Double Mechanical
Bearing	4 radial + 1 axial
Bearing lubrication	Based on the application
Drive	AC or DC motor, Steam turbine, diesel engine
Construction shape	Horizontal or vertical on feet IM1001 B3
IN/OUT	standard ANSI 150 B16.5 or DIN UNI EN 1092-1
Safety valve	It is ONLY possible to install a built-on safety valve with internal or external recirculation on request
MATERIALS
Body/Flange	Carbon steel or Stainless steel *
Set of 3 screws	Nitrided carbon steel or stainless steel *
Liner	Cast iron GG25; carbon steel; stainless steel
O-rings	standard Viton ®
Painting	standard SA2,5 + primer + final, total 160µ approximately; other painting cycles on request
(*) For different values contact SEIM